Accept Cookies?
Provided by OpenGlobal E-commerce
THIS ITEM HAS BEEN ADDED TO YOUR SHOPPING BAG
Proceed to Checkout Continue Shopping

MONMOUTH OUTDOOR TWIN TOWER PLAYCENTRE - WOODEN CLIMBING FRAME

Model No.: ATJE277

Monmouth Outdoor Twin Tower PlayCentre - Wooden climbing frame

Share |
Price  1,249.00 
Quantity:
Checkout

More about the MONMOUTH OUTDOOR TWIN TOWER PLAYCENTRE - WOODEN CLIMBING FRAME

This imposing Wooden Climbing Frame is similar to the Arundel Twin Wooden Climbing Frame but offers two larger platforms 120cm (4ft) x 90cm (3ft) and a climbing rope on the end of the swing arm.

The two towers connect via a 1.6m (63") long Clatter bridge, or can be upgraded to a Carrisbroke Climbing Frame wooden tunnel.

Access to the climbing frame towers is via the wide wooden staircase, up the wooden rungs or using the 8 rung by 4 strand commando net.

Depending on your garden layout, the swing arm, commando net and 3m (10ft) wavy green slide may be positioned off the two towers in a variety of ways.

Beneath one of the towers is a sandpit with seats for little children.

Climbing Frame Package Includes:

2 X Climbing Frame Towers

Double Wooden Swing Frame

Cargo Net

2 x Wooden Swing Seats

3m Slide

Clatter Bridge

Wooden Staircase

Wooden Sandpit With Seats

Wooden Platform Railings

Specification


Platform Size:1.2m x 0.9m (47" x 36") x Two

Platform Height: 1.5m (59")

Overall Dimensions and Length Of Swing Arm:3.9m x L8.23m (324" x L153")

Overall Height: 3.1m

Swing Arm Height: 2.65m (104")

Tower Dimensions: 1.2m x 0.9m x 3.1m (47" x 36" x 122") x Two

Platform Access: Wooden stairs + Wooden rungs + Commando net

Slide Dimensions: 3.0m (118")

Build Time: approximately 6 to 8 hours

-----------------------------------------------------------------------------------------------------------------------

General Information

Selected top grade pine (from forests approved and managed under the PEFC) scheme and which is seasoned, machined, planed smooth with rounded edges. All fixing holes and nut recesses are drilled, then the timber is pressure treated using a non-toxic solution approved for chilren's playground equipment.

Included with each product are all necessary fittings (galvanised or stainless steel, fasteners, ropes, a detailed set of assembly instructions and even a drill bit for preparing screw holes. The galvanised swing hangers have low-noise nylon bearings, and bolt through the swing arm beam.

Stability is provided by both the design and utilising Spiralock ground anchors with easy-drive fitting.


Delivery, Installation, and Assembly

Before purchasing of installing your PlayCentre, measure your garden. An unobstructed safety area of about 1.5m should be left for access and safety, with a clear zone of about 2.5m in front and behind the swings.

All sections of your PlayCentre are delivered flat-packed in manageable components. Delivery: BEFORE SIGNING for your delivery, please check that you have received all the components to build your PlayCentre and that none of the packages are damaged or open. Packages are labelled 1/9, 2/9 etc for easy checking. IF YOU ARE UNSURE, please sign 'damaged' or 'missing' and CROSS OUT the line 'Received in good condition' if there is any discrepancy. You should then contact us immediately on 01452-616169.

We recommend two or more people for assembling the PlayCentre. You may find it easier to make up the tower components horizontally before raising them upright. You will need some tools for the assembly. In particular, 13mm and 17mm box or socket spanners, a drill with Phillips driver, level and tape measure.

Note: wood is a natural product and as such is subject to the moisture content of the air and ground. Sometimes cracks or splits may appear, but this will not result in weakening of structural stability.


Warranty

All PlayCentre products carry a 10 year guarantee against rot and insect infestation on all timber sections.