Accept Cookies?
Provided by OpenGlobal E-commerce
THIS ITEM HAS BEEN ADDED TO YOUR SHOPPING BAG
Proceed to Checkout Continue Shopping

ARUNDEL OUTDOOR WOODEN CLIMBING FRAME

Model No.: ATJE255

Arundel Outdoor Wooden Climbing Frame

Share |
Price  639.00 
Quantity:
Checkout

More about the ARUNDEL OUTDOOR WOODEN CLIMBING FRAME

Imagine a complete high quality Wooden Climbing Frame, at the cost of a fully-featured steel climbing frame.

A tall wooden climbing frame tower with 90cm (3ft) square wooden platform, accessible by wooden climbing rungs or an 8 rung by 4 strand commando net. The tall swing arm has two adjustable wooden swings for children of all ages. From the front of the platform extends a sturdy 3m (10ft) long green wavy slide for loads of fun.

To top it all, built into the base is a sandpit with two seats!

Comprises:

Climbing Frame Tower

Double Wooden Swing Frame

Cargo Net

2 x Wooden Swing Seats

3m Slide

Dimensions:

Platform Size: 0.9m x 0.9m (36" x 36")

Platform Height: 1.5m (59")

Overall Dimensions and Length Of Swing Arm: 3.4m x L4.7m (134" x L185")

Overall Height: 3.2m (126")

Swing Arm Height: 2.65m (104")

Tower Dimensions: 0.9m x 0.9m x 3.2m

Platform Access: Wooden rungs and Commando net, Handgrips.

Slide Dimensions: 3.0m (118")

Build Time: approximately 6 - 8 hours

-----------------------------------------------------------------------------------------------------------------------

General Information

Selected top grade pine (from forests approved and managed under the PEFC) scheme and which is seasoned, machined, planed smooth with rounded edges. All fixing holes and nut recesses are drilled, then the timber is pressure treated using a non-toxic solution approved for chilren's playground equipment.

Included with each product are all necessary fittings (galvanised or stainless steel, fasteners, ropes, a detailed set of assembly instructions and even a drill bit for preparing screw holes. The galvanised swing hangers have low-noise nylon bearings, and bolt through the swing arm beam.

Stability is provided by both the design and utilising Spiralock ground anchors with easy-drive fitting.


Delivery, Installation, and Assembly

Before purchasing of installing your PlayCentre, measure your garden. An unobstructed safety area of about 1.5m should be left for access and safety, with a clear zone of about 2.5m in front and behind the swings.

All sections of your PlayCentre are delivered flat-packed in manageable components. Delivery: BEFORE SIGNING for your delivery, please check that you have received all the components to build your PlayCentre and that none of the packages are damaged or open. Packages are labelled 1/9, 2/9 etc for easy checking. IF YOU ARE UNSURE, please sign 'damaged' or 'missing' and CROSS OUT the line 'Received in good condition' if there is any discrepancy. You should then contact us immediately on 01452-616169.

We recommend two or more people for assembling the PlayCentre. You may find it easier to make up the tower components horizontally before raising them upright. You will need some tools for the assembly. In particular, 13mm and 17mm box or socket spanners, a drill with Phillips driver, level and tape measure.

Note: wood is a natural product and as such is subject to the moisture content of the air and ground. Sometimes cracks or splits may appear, but this will not result in weakening of structural stability.


Warranty and Maintenance

All PlayCentre products carry a 10 year guarantee against rot and insect infestation on all timber sections. All ropes, accessories, slides, and faulty workmanship are guaranteed for one year.

All PlayCentre products are CE marked. The products meet and exceed all British and European Safety of Toys standard BS 5665/EN1.

We strongly recommend that all fixings (nuts and bolts) are checked annually (preferably at the beginning of Spring) for tightness, and all ropes and other fasteners checked for any decay and for general condition. If in any doubt, replace items at once.